einzk1000

Filter device for normal dust range

Simple tubular filter device for
dust range from 20 to 2000 mg/m³

for IN- and OUT-Stack-Measurement.

Construction according to VDI 2066 and EN 13284.

(absolute 1-2 g), construction according to VDI 2066, page 2 (1981), 5-parts with filter cartridge. Separator with a filtering cartridge (cartridge stuffed with quartz wool or with quartz thimbles).


	Max. sampling rate: 4 m³/h, incl. one cartridge with cone, seal, without nozzle. Entrance: Internal thread G ½ Exit: External thread G ½ .


	Tubular filter device Outer diameter: 45 mm, Length: 145 mm

Stainless Steel	Art.-No.: 7.01-A
Titanium	Art.-No.: 7.01-T


	Nozzles according to VDI 2066, page 2 and EN 13284, with external thread G ½, Available openings from 6 - 30 mm, Length: ~ 68 mm.

Stainless Steel	Art.-No.: 1.01-A
Titanium	Art.-No.: 1.01-T






				details


	Seals for tubular filter device: Di 11 and Di 35 (available material: Aramid-composite-material, Nyhalit, Silicone, Teflon)


	Filter cartridge and matching glass- or quartz fibre thimbles see filter device - accessories

Tubular filter device for
dust range from 20 to 2000 mg/m³,
with plane filter (Ø 45 mm)

for IN- and OUT-Stack-Measurements.

Construstion according to VDI 2066, page 2
and EN 13284.

(absolute 1-2 g), construction according to VDI 2066, page 2 (1983), 8-parts
with filter cartridge and plane filter holder (Ø 45 mm).
Separator with a filtering cartridge (cartridge stuffed with quartz wool or with quartz thimbles). A plane filter (Ø 45 mm) following the cartridge filter retains broken fibres from the cartridge which may occur during the measurement. By this the detection limit of the gravimetric mass determination is reduce and the reproducibility of the measurement is enhanced. The separator consist of the filter housing and the filter.
Max. sampling rate: 4 m³/h,
incl. filter cartridge with cone, plane filter holder, seal, without nozzle.
Entrance: Internal thread G ½
Exit: External thread G ½.


	all filter in overview






				details


	Tubular filter device Outer diameter: 55 mm, Length: 145 mm

Stainless Steel	Art.-No.: 7.11-A
Titanium	Art.-No.: 7.11-T


	Nozzles according to VDI 2066, page 2 and EN 13284, with external thread G ½, available opening from 6 - 30 mm, length: ~ 68 mm.

Stainless Steel	Art.-No.: 1.01-A
Titanium	Art.-No.: 1.01-T


	Seals for tubular filter device: Di 11, Di 12, Di 13 and Di 35 (available material: Aramid-composite-material, Nyhalit, Silicone, Teflon)


	Filter cartridge and matching glass- or quartzffibre thimbles see filter device - accessories


	Dust - / aerosol - measurement equipment II according to VDI and EN 13284-1

Solid plastic-suitcases with PU-foam-material, with tubular filter device (7.11) for dust range up to 1000 mg/m³ and for low dust-range up to 20 mg/m³ the entrance of the plane filter-device (7.22) (can combine with the exit of the tubular-filter-device);
with 7 nozzles (openings: 6, 8, 10, 12, 14, 16, 18 mm),
3 bush with cone in transport-glasses,
3 plane filter-holders Ø 45 mm in transport-glasses and one bent.

Stainless Steel	Art.-No.: 7.41K-A
Titanium	Art.-No.: 7.41K-T




	Complete-Set for dust measurements of low concentration (<20 mg/m³) and higher up to 1000 mg/m³.

Self-regulating small heater with integrated thimble filter

Thimble filter, electrical heated, with powerful cartridge heater ~ 220 Watt (230 V), length ca. 150 mm, Ø 90 mm, with built in temperature sensor.

Material: outer jacket: Aluminium,
Filter device: Stainless Steel.

Entrance G ½ union nut with cone for thimble, exit: hose fitting for 10 mm suction hose.

Easy removable thimble section (knurled screws with thimble holder). matching for thimbles type 603 GM (particle retension 99,998% at 0,3 µm). Can places directly behind probe.
Selectable tremperature range: 50 .. 200°C, scale: 10°C (default 70°C).

Controlling with built in temperature sensor at the heater. With signal lamp, rotary knob with scale for the temperature below screw on cover. With rod holder.


	Best.-Nr.: 35.03-MK





			Im Beispiel mit Düse und Krümmer


	Developed for the sweep method to determine mass concentration of dust from small scale furnaces according to CEN/TS 15883 and for simple protection during gas sampling.


	Paul Gothe GmbH for Innovation and Quality